A Noise Investigation of Tunnel-Diode Microwave Amplifiers

An analysis and derivation of the noise figure of a tunnel-diode microwave amplifier are presented. The agreement between the measured noise figure and the theoretical results is an indirect check on the existence of full shot noise in germanium tunnel diodes at microwave frequencies. The limiting noise temperature of the amplifier is eI0R/2k, and can be approached by using diodes with small (RC) products in which the extreme overcoupling (load mismatch) and high gain can be achieved simultaneously

Biased random satisfiability problems: From easy to hard instances

In this paper we study biased random K-SAT problems in which each logical variable is negated with probability $p$. This generalization provides us a crossover from easy to hard problems and would help us in a better understanding of the typical complexity of random K-SAT problems. The exact solution of 1-SAT case is given. The critical point of K-SAT problems and results of replica method are derived in the replica symmetry framework. It is found that in this approximation $\alpha_c \propto p^{-(K-1)}$ for $p\to 0$. Solving numerically the survey propagation equations for K=3 we find that for $p<p^* \sim 0.17$ there is no replica symmetry breaking and still the SAT-UNSAT transition is discontinuous.Comment: 17 pages, 8 figure

Spin-orbit coupled j=1/2 iridium moments on the geometrically frustrated fcc lattice

Motivated by experiments on the double perovskites La2ZnIrO6 and La2MgIrO6, we study the magnetism of spin-orbit coupled j=1/2 iridium moments on the three-dimensional, geometrically frustrated, face-centered cubic lattice. The symmetry-allowed nearest-neighbor interaction includes Heisenberg, Kitaev, and symmetric off-diagonal exchange. A Luttinger-Tisza analysis shows a rich variety of orders, including collinear A-type antiferromagnetism, stripe order with moments along the [111]-direction, and incommensurate non-coplanar spirals, and we use Monte Carlo simulations to determine their magnetic ordering temperatures. We argue that existing thermodynamic data on these iridates underscores the presence of a dominant Kitaev exchange, and also suggest a resolution to the puzzle of why La2ZnIrO6 exhibits `weak' ferromagnetism, but La2MgIrO6 does not.Comment: 5 pages, 5 figs, significantly revised to address referee comments, to appear in PRB Rapid Com

Population connectivity shifts at high frequency within an open-coast marine protected area network.

A complete understanding of population connectivity via larval dispersal is of great value to the effective design and management of marine protected areas (MPA). However empirical estimates of larval dispersal distance, self-recruitment, and within season variability of population connectivity patterns and their influence on metapopulation structure remain rare. We used high-resolution otolith microchemistry data from the temperate reef fish Hypsypops rubicundus to explore biweekly, seasonal, and annual connectivity patterns in an open-coast MPA network. The three MPAs, spanning 46 km along the southern California coastline were connected by larval dispersal, but the magnitude and direction of connections reversed between 2008 and 2009. Self-recruitment, i.e. spawning, dispersal, and settlement to the same location, was observed at two locations, one of which is a MPA. Self-recruitment to this MPA ranged from 50-84%; within the entire 60 km study region, self-recruitment accounted for 45% of all individuals settling to study reefs. On biweekly time scales we observed directional variability in alongshore current data and larval dispersal trajectories; if viewed in isolation these data suggest the system behaves as a source-sink metapopulation. However aggregate biweekly data over two years reveal a reef network in which H. rubicundus behaves more like a well-mixed metapopulation. As one of the few empirical studies of population connectivity within a temperate open coast reef network, this work can inform the MPA design process, implementation of ecosystem based management plans, and facilitate conservation decisions

Fabrication process development of SiC/superalloy composite sheet for exhaust system components

A chemical compatibility study was conducted between SiC filament and the following P/M matrix alloys: Waspaloy, Hastelloy-X, NiCrAlY, Ha-188, S-57, FeCrAlY, and Incoloy 800. None of the couples demonstrated sufficient chemical compatibility to withstand the minimum HIP consolidation temperatures (996 C) or intended application temperature of the composite (982 C). However, Waspaloy, Haynes 188, and Hastelloy-X were the least reactive with SiC of the candidate alloys. Chemical vapor deposited tungsten was shown to be an effective diffusion barrier between the superalloy matrix and SiC filament providing a defect-free coating of sufficient thickness. However, the coating breaks down when the tungsten is converted into intermetallic compounds by interdiffusion with matrix constituents. Waspaloy was demonstrated to be the most effective matrix alloy candidate in contact with the CVD tungsten barrier because of its relatively low growth rate constant of the intermediate compound and the lack of formation of Kirkendall voids at the matrix-barrier interface. Fabrication methods were developed for producing panels of uniaxial and angle ply composites utilizing CVD tungsten coated filament

Real time flight simulation methodology

An example sensitivity study is presented to demonstrate how a digital autopilot designer could make a decision on minimum sampling rate for computer specification. It consists of comparing the simulated step response of an existing analog autopilot and its associated aircraft dynamics to the digital version operating at various sampling frequencies and specifying a sampling frequency that results in an acceptable change in relative stability. In general, the zero order hold introduces phase lag which will increase overshoot and settling time. It should be noted that this solution is for substituting a digital autopilot for a continuous autopilot. A complete redesign could result in results which more closely resemble the continuous results or which conform better to original design goals

Testing a Simplified Version of Einstein's Equations for Numerical Relativity

Solving dynamical problems in general relativity requires the full machinery of numerical relativity. Wilson has proposed a simpler but approximate scheme for systems near equilibrium, like binary neutron stars. We test the scheme on isolated, rapidly rotating, relativistic stars. Since these objects are in equilibrium, it is crucial that the approximation work well if we are to believe its predictions for more complicated systems like binaries. Our results are very encouraging.Comment: 9 pages (RevTeX 3.0 with 6 uuencoded figures), CRSR-107

Fragmentation of Nuclei at Intermediate and High Energies in Modified Cascade Model

The process of nuclear multifragmentation has been implemented, together with evaporation and fission channels of the disintegration of excited remnants in nucleus-nucleus collisions using percolation theory and the intranuclear cascade model. Colliding nuclei are treated as face--centered--cubic lattices with nucleons occupying the nodes of the lattice. The site--bond percolation model is used. The code can be applied for calculation of the fragmentation of nuclei in spallation and multifragmentation reactions.Comment: 19 pages, 10 figure

A polymorphic reconfigurable emulator for parallel simulation

Microprocessor and arithmetic support chip technology was applied to the design of a reconfigurable emulator for real time flight simulation. The system developed consists of master control system to perform all man machine interactions and to configure the hardware to emulate a given aircraft, and numerous slave compute modules (SCM) which comprise the parallel computational units. It is shown that all parts of the state equations can be worked on simultaneously but that the algebraic equations cannot (unless they are slowly varying). Attempts to obtain algorithms that will allow parellel updates are reported. The word length and step size to be used in the SCM's is determined and the architecture of the hardware and software is described

Omental Vascularized Lymph Node Flap: A Radiographic Analysis

Background Vascularized lymph node transfer is an increasingly popular option for the treatment of lymphedema. The omental donor site is advantageous for its copious soft tissue, well-defined collateral circulation, and large number of available nodes, without the risk of iatrogenic lymphedema. The purpose of this study is to define the anatomy of the omental flap in the context of vascularized lymph node harvest. Methods Consecutive abdominal computed tomography angiography (CTA) images performed at a single institution over a 1-year period were reviewed. Right gastroepiploic artery (RGEA) length, artery caliber, lymph node size, and lymph node location in relation to the artery were recorded. A two-tailed Z-test was used to compare means. A Gaussian Mixture Model confirmed by normalized entropy criterion was used to calculate three-dimensional lymph node cluster locations along the RGEA. Results In total, 156 CTA images met inclusion criteria. The RGEA caliber at its origin was significantly larger in males compared with females (p < 0.001). An average of 3.1 (1.7) lymph nodes were present per patient. There was no significant gender difference in the number of lymph nodes identified. Average lymph node size was significantly larger in males (4.9 [1.9] × 3.3 [0.6] mm in males vs. 4.5 [1.5] × 3.1 [0.5] mm in females; p < 0.001). Three distinct anatomical variations of the RGEA course were noted, each with a distinct lymph node clustering pattern. Total lymph node number and size did not differ among anatomical subgroups. Conclusion The omentum is a reliable lymph node donor site with consistent anatomy. This study serves as an aid in preoperative planning for vascularized lymph node transfer using the omental flap